KASTOcut GU 4 - Show machine

KASTOcut GU 4 - Show machine
KASTOcut GU 4 - Show machine
Product image 1KASTOcut GU 4 - Show machine
Product image 2KASTOcut GU 4 - Show machine

Regular price $23,580.00

Unit price per 

plus sales tax.
No shipping included, unless requested otherwise.
Ships in 5-10 business days

KASTOcut GU 4 - Show machine, Year of manufacture 2017

Universal bandsaw for mitre cutting.

Only here in the KASTOshop from $ 23,580 instead of $ 39,300: Show machine, directly from the manufacturer, with original KASTO service, at the best price!

Universal bandsawing machine of robust construction, for cutting of profiles, tubes, solid material at 90° and miter cuts. The saw unit can be turned easily, each requested miter adjustment can be adjusted continuously and quickly; one-side adjustment until 60° (acute angle 30°). The center of motion of the saw unit is situated at the intersection point between saw band and material supporting edge. So, a correction of the length is not necessary when miter angles are changed. The adjusting scale can be read easily. The fixing stops for 90°-, 45°- and 60°- cuts, the material clamping in the direction of material flow guarantee an exact working. The ergonomically and centrally located operating panel makes an easy setup of the machine possible.

Included equipment:

  • Machine base
  • Saw unit (saw frame)
  • Feed control with KASTO-Universal Hydraulic UH
  • Guide of the saw unit
  • Inclined saw head
  • Saw band guide
  • Saw band tension
  • Chip clearance of saw band
  • Main drive of saw band
  • Operation
  • Material clamping, machine vise
  • Miter cut adjustment
  • Hydraulic system KASTOcut GU - models
  • Coolant tank

Included optional equipment:

  • Linear laser
  • Material sensor (for semiautomatic)
  • Infinitely adjustable cutting speed
Equipment details and scope of supply

Included equipment:

  • Machine base
    • Robust weldment with no distortion.
  • Saw unit (saw frame)
    • Heavy duty, distortion-free welding construction, modular design, with ribbing optimised against vibrations. Using the latest design in technology and manufacturing methods, an extremely quiet running without vibration is obtained. This means shorter cutting times and longer band life.
  • Feed control with KASTO-Universal Hydraulic UH
    • This means constant feed speed when solid material is cut resp. constant cutting capacity when profiles and tubes are cut. Requested value to be pre-selected at control panel. The KASTO-Universal Hydraulic System guarantees an optimum adaptation of the feed to the cross section that has to be cut as well as an automatic overload protection of the saw band. The feed speed is infinitely pre-selectable, can be checked and optimised via cutting pressure manometer.
  • Guide of the saw unit
    • by swivelling frame with slide bearings.
  • Inclined saw head
    • Cutting through with a saw band that rises towards the material guide edge and in cutting direction. This reduces formation of burr and, at the same time, increases the cutting speed by reduction of the length of cutting through. This means cut-off pieces with little burr and shorter cutting times, at the same time, the saw band is saved.
  • Saw band guide
    • The lateral guiding by means of mechanically pre-tensioned carbide slide ways, the band guide plate is moved away for rapid change of saw band. Back guide by means of wear resisting rollers.
  • Saw band tension
    • Infinitely variable via ratchet, electrically supervised. Mechanical limitation of tension force. Automatic switching-off in case of band break.
  • Chip clearance of saw band
    • by means of a brush which is synchronised with the cutting speed. Brush motor-driven.
  • Main drive of saw band
    • Power: 1.74/2.28 HP (1.3/1.7 kW)
    • Cutting speed 104.96/209.93 ft. /min (32/64 m/min).
    • (Infinitely from 55.76-295.20 ft/min (17-90 m/min) - please see accessories).
  • Operation
    • The operating panel is ergonomically and centrally located.
  • Material clamping, machine vise
    • by means of a manually at KASTOcut GE or hydraulically at KASTOcut GU actuated horizontal vice, placed right-angled to the material guide edge.
  • Miter cut adjustment
    • The adjustment of the miter cut angle between 90° until + 60° is actuated manually.
  • Hydraulic system KASTOcut GU - models
    • executed in block construction, flanged to the machine tool table and of easy access from outside. In this way, maintenance time for oil-level control and change of filter can be minimised.
  • Coolant tank
    • integrated in the machine base, easily accessible for cleaning. Volume of coolant tank 13.20 gal (50 l), pump capacity 4.22 gal/min (16 l/min). Coolant supply through one nozzle at the band guides and one coolant hose.

Included optional equipment:

  • Linear laser
    • For projecting the cutting line at the work piece
  • Material sensor (for semiautomatic)
    • The saw head lowers to the material height after switching on, the material sensor switches automatically to the pre-focused feed speed. After the cut is done, the saw head lifts automatically to the original position
  • Infinitely adjustable cutting speed
    • At the control panel, frequency-controlled drive 65.60 – 360.80 ft/min (20 – 110 m/min)
    • Power 4.02 HP (3.0 kW)

Scope of Supply

  • KASTOcut GU 4 - including the described standard equipment
  • KASTO-Universal Hydraulic UH        
  • Hydraulic material clamping                 
  • Rapid lifting and lowering of the saw head
  • Chip container, removable
  • Synchronously running brush
  • Mechanical saw band tension, optical reading
  • Electrical fuse protection of the saw band coverings (UVV)
  • Infinitely adjustable saw band arm
  • Bi-Metal saw band
  • Glue anchors to dowel the machine
  • Operating tool
  • Operating manual according to the EU Machinery Directive and EN 82079
Technical Data
Cutting range:
Cutting range 90° round 16.92 in. (430 mm)
Cutting range 90° flat (W x H) 18.11 x 13.19 in. (460 x 335 mm)
Cutting range 90° flat 13.39 x 13.39 in. (340 x 340 mm)
Cutting range 45° round   14.17 in. (360 mm)
Cutting range 45° flat (W x H) 13.39 x 13.39 in. (340 x 340 mm)
Cutting range 45° flat 13.39 x 13.39 in. (340 x 340 mm)
Cutting range 60° round 9.45 in.  (250 mm)
Cutting range 60° flat (W x H) 8.66 x 13.39 in. (220 x 340 mm)
Cutting range 60° flat 9.45 x 9.45 in. (240 x 240 mm)
Shortest length of residual piece 1.38 in. (35 mm)
Smallest cutting dimension 0.24 in. (6 mm)

Dimensions and weight:

Length x Width
48.82 x 106.30 in. (1240 x 2700 mm)
Height, saw head in lowered position 53.90 in. (1369 mm)
Height, saw head in highest position 83.03 in. (2109 mm)
Material support height 27.56 in. (700 mm)
Total weight 2,314.85 lbs. (1050 kg)

Performance characteristics:
Total power 4.69 HP (3.5 kW)
Saw motor, Power 1.74/2.28 HP (1.3/1.7 kW)
Cutting speed infinitely adjustable 32/64 m/min
Saw blade dimensions
16’ 8”  x 1.3/8” x 0.042”in. (5090 x 34 x 1.1mm)

Saw blade guide: Carbide, interchangeable
Saw blade tension: mechanical
Saw blade cleaning: by means of interchangeable, synchronously running wire brush


coolant supply is through two nozzles and one coolant
hose, volume of coolant tank approx. 11.88 gal (45 l),
pump capacity 4.22 gal/min (16 l/min).

Light grey RAL 7035, structural painting
Anthracite grey RAL 7016, structural painting
Pure orange RAL 2004, structural painting

Electrical equipment: In accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC.

Type of mains: TN mains according to IEC 364/VDE 0100

Protective measures against indirect contact: Over-current protector (zero balancing).

The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shut-down time in the event of an error is not exceeded.

The use of a differential current switch in the mains in coming supply is not permitted.

Safety requirements: The offered machine corresponds with the valid safety requirements according to the machinery directive 2006/42/CE

Delivery terms: Possibly valid company’s own operating material regulations have not been taken into consideration when working out the offer, unless they are specifically mentioned in the quotation. The machine will be equipped with proven components selected by KASTO. If you insist on the observance of your operating material regulations we kindly ask you to make these regulations available to us for working out the appropriate offer. After placing the order, any specifications can no longer be considered. This is also valid for so called fire protection regulations


This sawing machine is particularly suitable for normally machinable structural steels and aluminum in round, flat and square form. Materials that are difficult to machine and plastics are only suitable to a limited extent. Occasional use in single-shift workshop operation is envisaged. The specified cutting ranges and performance characteristics must be observed. The use of uneven, twisted or burred starting material can severely impair the cutting accuracy. For more detailed information on the correct use of the machine, please refer to the operating instructions. Disregarding this area of application and/or General Terms and Conditions can lead to the warranty claims becoming void.


According to FCA (Incoterms 2020)

In case help is required for the shipment please contact us after placing the order at: thekastoshop@us.kasto.com

Close (esc)


Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Shopping Cart

Your cart is currently empty.
Shop now