KASTOhbs 2 - Edition „More Economy“
New machine KASTOhbs 2 in the KASTOshop Edition „More Economy“
Fully Hydraulic Feed Control Power Hacksaw
Only here in the KASTOshop: Brand new, directly from the manufacturer, with original KASTO service, at the best price!
Fully hydraulic feed control, two cutting speeds by pole-reversible motor, infinitely adjustable cutting pressure, lifting movement in the idle stroke, lifting movement independent from cutting pressure, saw bow guides which cover an extremely large area, miter cuts from 0 – 45°, adjustable at a scale, pendulum vice for maximum utilization of the saw blade, coolant device - capacity 4.22 gal/min (16 l/min), push-button for "on" and "off" functions, automatic switch off after finished cut.
Equipment details and scope of supply
Scope of Supply
- KASTOhbs 2 including the described standard equipment
- 2 hexagon keys
- KASTO-Saw blade
- Operating instructions manual according to the EU Machinery Directive and EN 82079
We will be pleased to advise you individually if you require equipment which is not sold through the KASTOshop.
|Cutting range 90° round||9.84 in. (250 mm)|
|Cutting range 90° flat (W x H)||11.02 x 7.87 in. (280 x 200 mm)|
|Cutting range 90° square||9.06 x 9.06 in. (230 x230 mm)|
|Cutting range + 45° round||7.09 in. (180 mm)|
|Cutting range + 45° flat (W x H)||6.69 x 7.87 in. (170 x 200 mm)|
|Cutting range + 45° flat (W x H)||6.10 x 9.25 in. (155 x 235 mm)|
|Cutting range + 45° square||6.69 x 6.69 in. (170 x 170 mm)|
|Dimensions and weight
|Length x Width
||54.53 x 19.88 in. (1385 x 505 mm)|
|Height, saw head lowered position||37.80 in. (960 mm)|
|Height, saw head in highest position||48.03 in. (1220 mm)|
|Material support height||19.69 in. (500 mm)|
Material support height with rotating foundation frame (accessories)
|21.85 in. (555 mm)|
|Total weight||396 lbs. (180 kg)|
|Total power||1.74 HP (1.3 kW)|
|Saw motor, power||1.34 HP (1.0 kW)|
|Average cutting speed||52.48/104.96’/min (16/32 m/min)|
|Stroke speed||203.36/410 ft/min (62/125 m/min)|
|Dimension of saw blade:||17.72 x 1.57 x 0.08 in. (450 x 40 x 2.0 mm)|
Light grey RAL 7035, structural painting
Anthracite grey RAL 7016, structural painting
Pure orange RAL 2004, structural painting
Electrical equipment: In accordance with DIN EN 60204. Supply voltage 400 Volt, 50 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost.
Type of mains: TN mains according to IEC 364/VDE 0100
Protective measures against indirect contact: Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shut-down time in the event of an error is not exceeded.
The use of a differential current switch in the mains in coming supply is not permitted.
Safety requirements: The offered machine corresponds with the valid safety requirements according to the machinery directive 2006/42/CE
This sawing machine is particularly suitable for normally machinable structural steels and aluminum in round, flat and square form. Materials that are difficult to machine and plastics are only suitable to a limited extent. Occasional use in single-shift workshop operation is envisaged. The specified cutting ranges and performance characteristics must be observed. The use of uneven, twisted or burred starting material can severely impair the cutting accuracy. For more detailed information on the correct use of the machine, please refer to the operating instructions. Disregarding this area of application and/or General Terms and Conditions can lead to the warranty claims becoming void.
According to FCA (Incoterms 2020)
In case help is required for the shipment please contact us after placing the order at: firstname.lastname@example.org